UHMWPE facing panel marine fender PE pads marine frontal panel![UHMWPE Facing Panel Marine Fender PE Pads Marine Frontal Panel](https://img3.grofrom.com/boyu/fcf743fbf939a06f5fbb74600da93cda.webp)
Fender panels distribute reaction forces to provide low hull pressures and cope with large tidal variations. They can also be designed to resist line loads from belted ships, or even point loads in special cases. Optional lead-in bevels reduce the snagging risk, whilst brackets (where required) provide highly secure connection points for chains. Closed box designs are used almost exclusively - all fully sealed, and pressure checked. Corrosion protection is provided by high durability C5M class paint systems to ISO9001, and additional corrosion allowances can be designed where required.
FEATURES & OPTIONS
Closed box steel structure
Internal structural members
Blind boss fender connections
Pressure tested for water tightness
C5M modified epoxy paint*
![UHMWPE Facing Panel Marine Fender PE Pads Marine Frontal Panel](https://img3.grofrom.com/boyu/f6e93c065bdc89b023b052374d675202.webp)
*OTHER OPTIONS AVAILABLE
Polyurethane topcoat (RAL5005 blue)†
†Alternative colours on request
Studs for UHMW-PE face pads
Chain brackets
Lifting points
Lead-in bevels and chamfers
Specification & Design
PANEL SPECIFICATIONS AND DESIGNS SHOULD CONSIDER:![UHMWPE Facing Panel Marine Fender PE Pads Marine Frontal Panel](https://img3.grofrom.com/boyu/7764060074938dfc53b7da575f9e054f.webp)
APPLICATIONS
Related products:
Contact information:
![UHMWPE Facing Panel Marine Fender PE Pads Marine Frontal Panel](https://img3.grofrom.com/boyu/fcf743fbf939a06f5fbb74600da93cda.webp)
FEATURES & OPTIONS
Closed box steel structure
Internal structural members
Blind boss fender connections
Pressure tested for water tightness
C5M modified epoxy paint*
![UHMWPE Facing Panel Marine Fender PE Pads Marine Frontal Panel](https://img3.grofrom.com/boyu/f6e93c065bdc89b023b052374d675202.webp)
*OTHER OPTIONS AVAILABLE
Polyurethane topcoat (RAL5005 blue)†
†Alternative colours on request
Studs for UHMW-PE face pads
Chain brackets
Lifting points
Lead-in bevels and chamfers
Specification & Design
PANEL SPECIFICATIONS AND DESIGNS SHOULD CONSIDER:
- Hull pressures and tidal range
- Lead-in bevels and chamfers
- Bending moment and shear
- Local buckling
- Limit state load factors
- Steel grade
- Permissible stresses
- Weld sizes and types
- Pressure test method
- Rubber fender connections
- UHMW-PE attachment
- Chain connections
- Lifting points
- Paint systems
- Corrosion allowance
- Maintenance and service life
- --Highest abrasion resistance of any polymer, 6 times more wear resistant than steel
- --Anti-Weather & Anti-Aging
- --Self-lubricating, Very low coefficient of friction
- --Excellent chemical & corrosion resistant
- --superior impact resistant, Noise- absorption, Vibration-absorption
- --High tensile Strength
- --Non-Toxic and smell
- --UV resistance and ozone
- --Flame Retardant; Relatively low in water absorption
- --Excellent electrical properties
- --Good performance in resisting environment stress crack, 200 times of ordinary PE
- --No adhesion
- --Light weight and easier to handle and fix
- --Cost efficient; Resulting in low energy consumption
- --Does not rot, split or crack; 100% recyclable
- --Great liner material for industrial material handling applications
- --Easy Reprocessed plastic ground protection mat
- Creats an instant roadway over virtually any type of terrain - mud, sand, marshy, uneven or soft terrain
- - Extremely durable to withstand vehicle weights up to 80 tons
- - Tested in extremes of hot and cold climate
![UHMWPE Facing Panel Marine Fender PE Pads Marine Frontal Panel](https://img3.grofrom.com/boyu/7764060074938dfc53b7da575f9e054f.webp)
APPLICATIONS
- Fender panel (frame) face pads
- Rubbing strips
- V-fender shields
- Lock entrance and wall protection
- Bridge buttress protection
- Beltings on workboats
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
![]() | ![]() |
Contact information: